Radial Basis Neural Network for Availability Analysis
Abstract:
The appliance of radial basis neural network is demostrated in this paper. The method applies failure and repair rate signals to learn the hidden relationship presented into the input pattern. Statistics of availability of several years is considered and collected from the management of concern plant. This data is considered to train and calidate the radial basis neural network (RBNN). Subsequently validated RBNN is used to estimate the availability of concern plant. The main objective of using neural network approach is that it’s not require assumption, nor explicit coding of the problem and also not require the complete knowledge of interdependencies, only requirement is raw data of system functioning.
Author(s):
Deepika Garg and Naresh Sharma, School of Basic & Applied Sciences, GD Goenka University, Gurugram, 122 103 India
DOI:
Keywords:
References:
Arora, N. and Kumar, D. (1997). “Availability analysis of steam and power generation systems in the thermal power plant”, Microelectron Reliability, 37, 5, 795–799.
Aven, T. (1990). “Availability Formulae for Standby systems of Similar Units that are Preventively Maintained”,IEEE Transaction on Reliability, 39, 5, 603–606. https://doi.org/10.1109/24.61319
Bhattacharya, S. and Singh S. S. (2011). “Location Prediction using Efficient Radial Basis Neural Network”, International conference on Information and Network Technology, IACSIT Press, Singapore, 4, 68–72.
Broomhead, D. S. and Lowe, D. (1988). “Multivariate functional interpolation and adaptive networks”,Complex Systems, 2, 321–355.
Chen, S., Cowan, C. F. N. and Grant, P. M. (1991). “Orthognal least square learning algorithm for radial basis function network”, IEEE Trans. On neural networks, 2, 2, 302–309. https://doi.org/10.1109/72.80341
Dyer, D. (1989). “Unification of reliability, availability, and reparability models for Markov systems”, IEEE Transactions on Reliability, 38 2, 246–252. https://doi.org/10.1109/24.31116
Garg, D., Kajal, S., Singh, J. and Kumar, K. (2008). “Performance Analysis of a Screw Plant”, Journal of Mathematics and Systems Science, 4, 85–94.
Garg, D. and Kumar, K. (2009). “Performance Analysis of a Cattel Feed Plant”, ICFAI Journal of Science & Technology, 5 2, 83–94.
Garg, D. and Kumar, K. (2009). “Matrix Based System Reliability Method and its application to Rice Plant”,ICFAI Journal of Computational Mathematics, 2 4, 17–30.
Garg, D. and Kumar, K. (2009). “Availibility Analysis of a Cattle Feed Plant using Matlab Tool”, International Journal of Applied Engineering Research, 4 6, 913–920.
Garg, D., Kajal, S., Singh, J. and Kumar, K. (2009). “Reliability Analysis of a Screw Plant Using Matrix Method”, Ganita Sandesh, 23 1, 71–78.
Garg, D., Singh, J. and Kumar, K. (2009). “Availibility Analysis of a Cattle Feed Plant Using Matrix Method”,International Journal of Engineering, 3, 2, 201–219.
Garg, D., Singh, J. and Kumar, K. (2009). “Performance Analysis of Screw Plant Using Matlab Tool”,International Journal of Industrial Engineering Practice, 1, 2, 155–159.
Gupta, P., Lal, A. K., Sharma, R. K. and Singh, J. (2005). “Behavioral Study of the Cement sciences”, Journal of Mathematics and Systems Sciences, 1, 1, 50–70.
Gupta, P., Lal, A. K., Sharma, R. and Singh, J. (2007). “Analysis of reliability and availability of the serial processes of plastic –pipe manufacturing plant: A case study”, International Journal of Quality & Reliability Management, 24 4, 404–419. https://doi.org/10.1108/02656710710740563
Hartman, E. J., Keeler, J. D. and Kowalski, J. M. (1990). “Layered neural networks with Gaussian hidden units as universal approximators”, Neural Comput., 2, 210–215. https://doi.org/10.1162/neco.1990.2.2.210
Kaushik, S. and Singh, I. P. (1994). “Reliability analysis of the naphtha fuel oil system in a thermal power plant”,Microelectronics.Reliability, 34, 2, 369–372. https://doi.org/10.1016/0026-2714(94)90119-8
Kumar, D., Singh, J. and Pandey, P. C. (1990). “Design and cost analysis of a refining system in the sugar industry”,Microelectronics Reliability, 30, No 6, 1025–1028. https://doi.org/10.1016/0026-2714(90)90274-Q
Kumar, S., Mehta, N. P. and Kumar, D. (1997). “Steady State behavior and maintenance planning of a desulphurization system in a urea fertilizer plant”,Microelectronics Reliability, 37, 6, 949–953. https://doi.org/10.1016/0026-2714(95)00115-8
Markopoulos, A. P., Georgiopoulos, S. and Manolakos, D. E. (2016). “On the use of back propagation and radial basis function neural networks in surface roughness prediction”, Journal of Industrial Engineering International, 12, 3, 389–400. https://doi.org/10.1007/s40092-016-0146-x
Mishra, S. K. and Sharma, N. (2018). “Rainfall Forecasting using Back Propagation Neural Network”, Innovations in Computational Intelligence. Studies in Computational Intelligence, Chapter 19, 713, 277–288.
Park, J. and Sandberg, J. W. (1991). “Universal approximation using radial basis function networks”,Neural computation, 13, 246–251. https://doi.org/10.1162/neco.1991.3.2.246
Poggio, T. and Girosi, F. (1990). “Networks for approximation and learning”, Proc. IEEE, 78, 9, 1481–1497. https://doi.org/10.1109/5.58326
Powell, M., Mason, J. C. and Cox, M. G. (1987). “Radial basis functions for multivariable interpolation: A review, In Algorithms For Approximation”, Clarendon Press Institute Of Mathematics And Its Applications Conference Series. Clarendon Press, New York, NY, 143–167.
Singh, I. P., Tewari, P. C. and Khare, M. K. (1991).“Reliability analysis of a conveyer belt system, with only one server, subject to failures and idleness after repair”, Microelectronics Reliability, 31, 5, 823–826. https://doi.org/10.1016/0026-2714(91)90018-3
Singh, J. and Dayal, B. (1992). “Reliability Analysis of A system In a Fluctuating Environment”,Microelectronics Reliability, 32, 5, 601–603. https://doi.org/10.1016/0026-2714(92)90612-O
Singh, J. and Goel, P. (1995). “Availability analysis of a standby complex system having imperfect switch -over device”, Microelectronics Reliability, 35, 2, 285–288. https://doi.org/10.1016/0026-2714(94)00041-L
Tatar, A., Naseri, S., Sirach, N. (2015). Moonyong, L. and Bahadori, A., “Prediction of reservoir brine properties using radial basis function (RBF) neural network”, Petroleum, 1, 349–357. https://doi.org/10.1016/j.petlm.2015.10.011
Tewari, P. C., Kumar, D., Kajal, S. and Khanduja, R. (2015). “Decision support system for the cystallization unit of a sugar plant”, Icfai J. of Science and Technology, 4, 7–16.
Venkatesan, P. and Anithe, S. (2016). “Application of a radial basis function neural network for diagnosis of diabetics mellitum”, Current Science, 91, 9, 1195–1199.
